After several months of regular rehearsal and zero CPU issues, (of course) while we were on stage I had to pause the performance to restart GP. I’ve thoroughly enjoyed working in GP, but that experience made me very nervous. I need to have the assurance that my rig is bulletproof, and I know that this is the intention of GP.
Admittedly my setup is fairly complex, using three instances simultaneously. But why, after no issues in rehearsal, would I all of a sudden have CPU crackles at a show? Could it have something to do with the electricity at the venue? I’ve gone thru the PC Optimization guide, but how do I pressure test my rig, to avoid this in the future?
My first guess would be temperature. Are you using a laptop? Is the ventilation and ambient temperature for the laptop better in rehearsal than on the stage? When newer laptops get too hot they’ll thermal throttle, no matter how hard you try to get them not to.
My next guess would be anything else different about the setup. Do you have wifi disabled at the show?
I do not use coolers, what models should I look into? I use a souped up lenovo think pad. It wasn’t a particularly hot environment, although perhaps another factor was that after soundcheck, I just left the laptop and GP open. But it couldn’t have been more than an hour, which is far less time than our rehearsals.
Uninterruptible Power Supply
It provides battery backup power in the event that the real power goes out or even just flickers. Good ones are expensive and heavy.
The fact that everything worked fine for you in rehearsals does really indicate that there was something going on at your show that was different….whether it was a temperature issue or something as simple as a cable going bad is obviously not easy to diagnose.
Hmm, please report back if the thread provided the solution (and which one).
Both of these issues were with Lenovo Thinkpad P16s (Gen 2). (With Frank1119’s help and these solutions, they now both work perfectly).
I would try to “Ultimate Performance” Option (the 2nd thread I listed) first. If that does not work, you can move on to Throttlestop as a potential solution.
I agree that the system should be optimized but that still begs the question as to why everything worked fine in rehearsal but failed (temporarily) on stage.
When I did it I had no idea it would work with my Lenovo P16. But it worked!
So, I have no idea whether it would do the trick with your particular machine.
In my case, I got crackling even though the CPU was not that high (my CPU should go up to around 5.0 if fully pushed)
With one of my Lenovo P16 laptops, setting the Ultimate Power Plan to permanently engage worked.
My other (nearl duplicate) laptop later had a similar issue, which was not fixed by doing that. Again, I noticed the CPU was not even that high when I got crackling. In that case, Throttlestop (using the settings Frank1119 suggested settings) did the trick.
Personally I do not know much about computers generally or Windows in particular. But, if other steps do not work, I would think it would be worth a shot (in the order I suggested above).[Disclaimer: at your own risk].
I sometimes have issues with my audio interface (Behringer umc1820): if it is left powered on (after being used), but not connected to any computer, then, when I connect and power-up my laptop sometimes the interface doesn’t work alright: crackling, stuttering or not even being recognized. I solve this by powering it off, then powering it on again. But this is not during use, do I don’t think it applies to your case.
Another source of issues could be that the sample rate is being changed. If you use Windows, then for example the Windows sounds (for example, device arrival sounds) might trigger this. It’s fairly difficult to recover from this, except by killing all GP instances. You can prevent this from happening by disable your audio interface for use by the Windows sound system. At least select the “no-sounds”-sound-scheme, to prevent Windows from making sounds on its own.
What does the CPU look like in the Task Manager? Ram?
Maybe post your laptop specs?
Also post your sample/bit rate settings.
If you are getting crackling, but you are not maxing out your CPUs (you could also look at all your cores separately in the Task Manager), this “may” suggest that tweaks (Ultimate Power Scheme and/or Throttlestop) I referenced could help. (You are not using your full CPU’s potential).
Yep! @zfw You are talking of “CPU-crackles”… how did you make sure, the crackling is actually caused by CPU overload? What shows the GP-internal CPU-indicator?
It also might be interesting what audio interface you are using…
(I once was using a Steinberg interface for quite a while without any issues, but all of a sudden it started to erratically distort the audio. But it worked flawlessly on another machine… i sold it and bought another interface, which instantly worked great,)
Please provide more information, so people might get a better picture of your situation.
This may sound silly, but is there any chance your laptop wasn’t plugged into mains power? A laptop running on batteries might seem to be working fine but (depending on your power settings) it will likely run slow, resulting in pops and crackles.
Hi everybody, thank you all for the feedback. I’ve had an unusually busy week or so of my day job and haven’t had the time to devote to trouble shooting. But I appreciate everyone’s feedback and will make a point to follow up on this thread as soon as I can.