Sustain pedal sticks

General discussion about Gig Performer
1

I am using GP with plugin persist v2 and noticed that sometimes when I switch to a different variation after I press notes in the new variation the sustain pedal is on making notes sound stuck until I press the sustain pedal.
Anyone experienced this before?
Without a sustain pedal plugged in this never happens.
Could that be a problem with my BK5 keyboard somehow sending sustain on messages?
I will try with sustain on a different port to see what’s going on.
Perhaps with a different keyboard.

In a previous post I thought this was stuck notes and I asked how to assign the panic - however this was NOT stuck notes.

2

You should see that in the global MIDI monitor window

3

Yes I will check to see what’s being sent and from where.
I am wondering could this be caused by the plugin persist v2 scriplet ?
One of the ccs I assigned to widget is cc64 but that comes from the GP local port - so I was assuming it would not conflict with my sustain from bk5.
Plus if cc64 was the issue - it should happen without any sustain pedal plugged in.
But only happens with sustain pedal plugged in.

4

what happens when you remove it?

5

Can’t remove it. As I depend on a modified version of it to smooth switch variations.

6

Plugin Persist 2 doesn’t act on the CC64, I we don’t know about your modified version.

But @pianopaul is right have a look at your GP Global MIDI Monitor and test without the modified Scriptlet to see if it changes something.

7

You know how we have to modify the cc? Like 127?
I have many instances so I started at cc33 and went past cc64
So GP local port is sending that control to the scriplet in one of the instances.

8

Modification is not large. It just ensures it’s fully persisting even if we don’t hold notes. That was just a single missing edge case.
I gave clear explanation first time around but my posts got not only moved but deleted as well.

9

Sending a CC64 to the GP Local MIDI Port should not be a problem if you don’t use MIDI In Omni ports.

10

Yes. I do not use Omni ports.

11

I think I noticed one or two racks that somehow had a pedal action saved in the wrong position (sustain pedal on). Was a while ago. I made sure the pedal action was in the correct position and re-saved the rack, and seemed to fix what ever the issue was.
Maybe try that.