Using widgets corresponding to PC settings, you could probably do what you want. I am looking for users who could test this Scriptlet and you could be a nice candidate
If you also want to send PC even when switching to another variation within the same rackspace, you can test this alternative solution based on a Scriptlet (see the wiring view) controlled by some widgets. The Scriptlet was not really tested until now. So, please, if you need it, test it carefully and report any issues here. Also a positive feedback after having deeply tested will be appreciated. Here is the Program Change Scriptlet in a test gig file (please replace the marked block by your hardware synth MIDI out block):
In the meantime I also added a “Learn Mode” which makes it possible to learn the PC from the hardware synth itself while selecting the sounds on it. (also not really tested)…
Learn_Program_Change_Scriptlet.gig (238.5 KB)
ACHTUNG : don’t forget to check the “pass program change messages” checkbox of your synth MIDI out block once you replaced it in the wiring view!
Nota: Using only the learning mode button, a set of PC/MSB/LSB text labels can make the panel much simpler and elegant (but at least one widget is required to store the PC/MSB/LSB.
Let me know if it works for you… well, let me know if it works at all
