GP3 & AutoTonic

General discussion about Gig Performer
1

I cannot get my midi controller,
Arturia KeyLab 25 - to make a sound in Gig Performer 3 whilst using AutoTonic…
… with LoopBe30 as my internal Midi ports__

Although Midi indicator (top right of GP3)
shows activity, just no sound…

I have success when:
KeyLab25 as MIDI In w/GP3 :heavy_check_mark:
KeyLab25 as MIDI In w/REAPER :heavy_check_mark:
KeyLab25 as MIDI In w/AutoTonic :heavy_check_mark:
… and then feed AutoTonic into Reaper :heavy_check_mark:
… so far, zero luck getting AutoTonic and GP3 to communicate with simple or complex schemes…
Perhaps I am crossing ports or getting something scrambled in this scheme…?

  • or maybe they do not play nice together? __
  • any help or suggestions are greatly appreciated :notes:
  • thank u kindly - Tony
2

What is AutoTonic?

3

Modal MIDI Transposer

https://g.co/kgs/VEMNJg

4

For my understanding:
You play on your Arturia and can see Midi Messages in the global Midi Monitor in Gig Performer?

What is your connection?
Arturia => AutoTonic
AutoTonic Midi Out => LoopBe30 Input
LoopBe30 Output => Gig performer ?

Or are you using AutoTonic as a plugin in Gig Performer?

Can you upload a gig to show the issue?

Maybe I can help you

5

Thank you for the reply pianoPaul…
The midi routing scheme is exactly as you suggested… Auto tonic is standalone does not run in VST… It works as a “sandwich“ app

  • midi controller, > AutoTonic, >
    LoopBe30be 30, > GP3… No luck

  • to compare, when I have Reaper getting the LoopBe30 input, everything works as it should. Replacing GP3 for Reaper in the same scheme yields nothing, but with evidence that GP3 is rcving the midi (flashing midi indicator)…
    AND when I click on the Midi In block for KeyLab25 controller,… I get sounds when playing the keyboard screen controls…

6

which version of gig performer are you using?
what messages do you see in the global midi monitor of gig performer?
what plugin in gig performer are you using?

7

GigPerformer 3 (GP3)
note on and off messages via Internal MIDI
Blue3 Organ… same thing with other instruments…
All of which have had zero problem, independently in both GP3 and AutoTonic

8

I’ve posed the same scenario with Clemens at AutoTonic…

9

when you include a midi monitor plugin in parallel to blue 3, can you see Note on And Note Off Messages?
Which velocity?
Which range of notes and which midi channel?

Can you post a screenshot?

10

AT&GP3_01
AT&GP3_011136×711 263 KB

I am unsure how to run it “Parallel”?
I access MIDI Monitor from the Title Bar: WINDOW drop down menu

11

AT&GP3_02
AT&GP3_021336×787 340 KB

clicking on MIDI In Block reveals: . . .

12

you can include the midi monitor plugin and connect from your midi in.
then you can open this plugin and see the messages

Bildschirmfoto 2020-04-24 um 20.44.48
Bildschirmfoto 2020-04-24 um 20.44.48860×880 135 KB

13

Please upload your gig.

14

Here’s something else…

My Reaper is in a Tascam 4x4 interface
MyGP3 is in a Tascam 144ii interface…
not sure if this matters

15

In Gig Performer You are using virtual midi as midi in ?

16

the output from AutoTonic is sending out Internal MIDI 1Example GIG.gig (31.2 KB)

17

Test.rackspace (10.6 KB)
create a new gig and import this rackspace
the open the midi monitor plugin and take a look at the messages

18

the clippings I sent show my MIDI IN (Arturia KL25)
…also shows the Virtual MIDI In… I have them both on the screen because I was trying different paths and not knowing which way was correct…

  • The midi lite flashes whether or not I have either of those connected when playing keylab, again: no sound there, but sound within the MIDI IN Block screen piano bar…
19

ok trying the test rack now, thanks, I’ll be back_

20

you know that blue3 reacts on midi channel 1 & 2
and are you sure your Midi In blocks are the virtual Midi In and not the Arturia Controller?