GP Streaming Player - Control of X Touch Mini

General discussion about Gig Performer
1

I tried to control the loop button from the streaming audio player of X Touch Mini. Unfortunately, the LED on the X Touch Mini does not light up properly:

If the button is programmed to “Toggle”, I have to press 2x on the X Touch to toggle the loop button on the streaming audio player and the LED changes incorrectly

If the button is programmed to “Momentary”, it only lights up briefly

Does anyone have a solution to this problem?

Translated with DeepL Translate: The world's most accurate translator (free version)

2

I do own the x touch mini and I will have a look at it… most probably it all depends on the configuration of the controller hardware itself. If you are on Windows, I maybe can send you my config file for the x touch mini.

3

I use Windows, the X Touch can actually only do “Toggle” or “Momentary” or Mackie Mode…

4

I want the control button of the X Touch to light up synchronously with the loop button

5

I sure can tell you that it definitely works, I just have to check again how things have to be configured.

6

When the “Learn” button in GP is on, everything works very well…

7

Who can help with this topic?

8

Have a look at this posting which also contains a configuration file for the x touch
https://community.gigperformer.com/t/hardware-rackspace-panel-for-behringer-x-touch-mini/6042?u=schamass
I hope this helps.

9

Unfortunately I cannot open the page.

10

Is that what you mean?

Also, I believe @schamass created a great X-Touch Mini panel as seen here:

X-Touch-Mini-panel
X-Touch-Mini-panel1457×412 46.2 KB

Read more about this here: [Gig] Panel for Behringer X-Touch mini

11

I already tried it yesterday, with the same results mentioned above…

12

When I switch on the streaming player or on the panel it works, on the X Touch only when I switch twice…the LEDs are then in opposite directions

13

With the “Momentary” setting (X Touch) it works but the LED on the X Touch does not light up continuously…

14

Have you used the appending *.bin file to re-configure your X-Touch mini according to the needs for a proper bidirectional MIDI functionality?
XTouch_latching_buttons.bin (650 Bytes)

This file can only be used with the according configuration software from the Behringer website:
https://mediadl.musictribe.com/download/software/behringer/X-TOUCH/X-TOUCH-EDITORv1.21.zip
Don’t forget to make a backup of your current X-Touch config!

If you shouldn’t get it to work, maybe something else goes wrong?
Please upload a rackspace or a gig file (reduced to the minimium requirements to show the issue).
Thanks.

1 Like
15

If you want the X-Touch Mini button to act as a toggle, you must have it configured as toggle, not as momentary. The other key requirement is that the X-Touch must be sending CC messages, not Note messages.

16

That’s why i provided my config file and asked if he uses Windows (there is no Apple version of the configuration tool from Behriger)…

17

It works with this file for the X Touch. Wow thanks!

1 Like
18

I will try to transfer the system to Korg Nano Kontrol2 and test whether it works just as well. I am using Win 10 / Win 11

19

I have tried to transfer the system to Korg Nano Kontrol2, but unfortunately there are the same problems as with X Touch at the beginning. Is there such a configuration file for Korg Nano Kontrol2?