I have one Rackspace with Piano Sound Audio coming from my Nautilus. In another Rackspace I have the Same Piano Audio from the Nautilus and one Synth Sound from VST. When I am in Setlist Mode and Change from Verse with RS 1 to Chorus with RS 2 I have one Problem. When I hold the Chorda and Change the SongPart I have a jump that Sounds Like IT IS doubling my Piano Audio. So I have to Stop Play and than do the Change. But while playing IT IS fifficult to do a Stop for Changing Songpart? How can I solve this Problem?
Are you using MIDI Patch Persist on your Rackspaces?
Yes I do but doesen’t make a different. Seems Like the Sound ist doubling when I hold Keys and Change to other RS
Can you upload a small gig file?
I’m Home tomorrow. So I will send it tomorrow.
Here is the Link to a Gigfile using to of the Songs for example.
What Song in Set List Mode and what Song Parts?
In Titanium from Verse to Chorus and from Chorus to Bridge. Everytime I Change the SongPart IT IS doubling the Audio coming in. Also at Fields of Gold.
https://1drv.ms/v/c/bf1756e6984ed676/IQDgDqoeUyE-Qqw02iy3o2QCAQe9f8QkMblRQ3ygvbqkzHU
I Made a Video of It with Titanium.
The incoming Audio is Like trigering twice while I hold the Keys
I tested with your gig Gig_Test
Selected the song part Chorus 1 in Song Titanium.
played a chord and while holding down the chord switched to song part Bridge.
I can not hear any volume differences or double triggering.
And in the video a different gig file is used.
I’m using the Same RS in the Video. For the Upload I deleted some other Stuff in the GF. It’s the incoming Audio that is doubling the Sound. I changed now that the incoming Audio from the Hardware Keys only going thru the Global. Know when IT IS Not routet to the Song RS the Sound and Volume stays.
I did it from Global to the Song and Back to the Global before because I would use some VST FX in the Hardware Keys.