This procedure is tested with Logic v10.7.4. In this example, we’ll use two GP Relayer blocks; the GP Relayer #1 block will send audio from Gig Performer to Logic, and the GP Relayer #2 block will receive audio from Logic to Gig Performer. First, insert a GP Relayer block in the Wiring view and co…

Here’s a YouTube Short w/ Cameron Winters. [Send Audio and MIDI to and from your DAW with GP Relayer]

Thanx. Can you please help with the midi connection. I use in GP: Midi in > Midi Filter > GP relayer send (midi connected) How Do I use a Software Instrument with the midi in from GP (not from Logic?)

Just use an IAC port to send MIDI into Logic and use Relayer to capture the audio to send back to Gig Performer

Yes, I am pretty sure this is the only way to do it with Logic. In Logic 11 there is a new port available referred to as the Logic Pro Virtual In (or Out).

If you want to record ( link ) While you you can get audio coming into the track, note that Logic is recording the track input device, not the output of GP Relayer. To record GP Relayer, @rank13 needed to route it to a Bus, and then have a second audio track that had this Bus set to be the track inpu…

Could someone elaborate on how to do this, using the Logic Pro Virtual In that elucid references below?

Ok, I’ve tried this method that npudar suggested above. Still saying that 'Local host is not active". I’ve turned on Input monitoring (which in my opinion defeats the purpose of monitoring directly for gig performer). Nothing is working… Very frustrating. has anyone figured out a solution for using…

[image] culldee: Very frustrating. has anyone figured out a solution for using in Logic or GarageBand? The solution on the page you referenced works just fine. Logic was the first DAW we used for testing. There’s even a template Logic file. [image] Logic error when attemptin…

Ive been using GP with Logic for a while and it seems to work fine most of the time. Pretty cool actually. The only issue is Logic reports ‘an AU plugin has caused an error’ every now and then. Maybe 3-4 times during a 3 hour session and i lose sound. The option to reset works fine though so it’s a…

[image] Dave_bass5: Logic reports ‘an AU plugin has caused an error I’ve seen that with many plugins on Logic - randomly. Not a very helpful error message, is it!

GP Home
Blog
Downloads
Store
Docs

Gig Performer Community

How to use GP Relayer with Logic

General discussion about Gig Performer