I’m trying to set up a KORG nanokontrol 2 as a real time controller for my rig. It only has 6 knobs, so I was hoping to set up a feature whereas a ‘selection matrix’ would allow those 6 knobs to be dynamically assigned to a MIDI controller depending on what was selected. I got a hack around workin…

For reference, here’s my hack: On ControlChangeEvent(m : ControlChangeMessage) from NanoKorg var PedalPanel : Double = GetWidgetValue(PedalControl) AmpPanel : Double = GetWidgetValue(AmpControl) CCNumber : Integer = GetCCNumber(m) CCValue : Integer = GetCCValue(m) CCConvertedValue : …

Take a look at this function: MapWidgetToPlugin https://gigperformer.com/docs_5_0/SystemFunctionList.html#MapWidgetToPluginw%20:%20Widget%20plugin%20:%20Block%20parameterNumber%20:%20Integer

That’s not quite what I meant. I meant reassigning what MIDI control a widget responds to. A better example: I use the Morgan Amp Suite from Neural DSP. I want to be able to use the nanokontrol for adjusting the stomp box FX as well as the amp. So I have two buttons on the rackspace. If one is …

Have a look at this - maybe that’s what you need… [image] [Gig] Drawbars and faders switcher Gig and Rackspace Files In this gig file a a rackspace script is used to have a single set of hardware controllers (say, faders) move two different groups of widgets, dependent on …

This rackspace script will use a button on the controller (in this case cc39 value 127 ) to change the mapping of a given widget. You can then use learn the knob widget to control the parameter currently assigned to it. Var CS : MidiInBlock //$</AutoDeclare> var toggle : integer = 0 w1:…

[image] SteveC-Bome: change the mapping of a given widget That’s not what he wants — he wants to be able to change the MIDI message that is tied to the widget

OK, this is an unusual request. I though he wanted to use a single knob (CC value) to control different parameters on a given plugin. Apparently he wants to re-assign a different MIDI messages to a given Widget. In my example, if a given value is selected my knob controls my Sektor synth OSCA pa…

[image] SteveC-Bome: use a button to alter the channels on the nanoKontrol input I thought of that too. It seems like the simplest A/B solution.

That’s a good idea. I’ll try that.

Keep in mind, that if you have one parameter set to a different value then the other parameter, the second you turn the knob after changing parameter, the value will jump to the physical value of the knob. So if you are using the same knob to control different parameters while playing, you might get…

Dynamically changing widget MIDI assignments

Scripting with Gig Performer

schamass November 13, 2024, 4:26pm 5

Have a look at this - maybe that’s what you need…