I have a different set up at home and in the rehearsal room.
At home I have as bottom keyboard a Studiologic SL88 while in the rehearsal room I have a StudioLogic Acuna 88. So I created long time ago a Rig Manager setup with two settings, one for home and one for Gig (or rehearsal).
However, during my last gig, suddenly the Gig setting was not working. I had to revert to an older Gig file. During my last rehearsal I had the same issue, but I don’t know how to fix it.
Below is in the red box a MIDI in box shown for the lower keyboard which actually DID work.. As you can see it shows Midi In (Acuna 88).
However, in a song that didn’t work I get this:
As you can see, There is just Midi In.
Even when I relearn the keyboard, it shows up light green, but of course as in the previous picture it is somehow not connected to the lower keyboard anymore.
I noticed there are many MIDI In blocks that only have Midi In, thus without Acuna 88 behind it, making them all silent.
Is there a way to fix this or should I replace all broken MIDI in blocks? (which would take a lot of time as I use regularly different key zoning and velocity settings).
Or what could be the reason the Acuna 88 MIDI In blocks are changed to ‘generic’ Midi in blocks? (to prevent this doing from the future).
