My Bose L1 Pro is a mono system with stereo available at the headphone port of the Bose T4S mixer. If I leave my songs as they are in stereo, then the RH channel vanishes in the main out. The only way to prevent this is to set all the songs in mono at the GP level. I love the stereo sound of panned songs through my iems. but have not found a workaround yet. Any ideas out there?
What Audio Interface are you using?
What is RH channel ?
Focusrite Clarett 2 Pro. RH = Right Hand (LH = Left Hand)
Which audio out (L or R) are you using going from the Focusrite to the Bose? Maybe switch to the other one (I think L only is usually mono, but maybe not always).
It’s is, but to get a stereo IEM mix at the headphone out, I need to input both channels into the Bose T4S mixer. So I input to ch 5 and 6 which I have already panned left and right in the mixer settings. Immediately, the R channel vanishes from the main main out. And the stereo vanishes from the IEMs also. The Bose T4S mixer does not have a summing function at the main out. The only way is to go back into GP and remove all the stereo panning at the source.
Have you tried powering the T4S separately and connecting its two analog L/R outputs to inputs 1 and 2 of the L1 Pro, instead of using the ToneMatch Ethernet cable ?
Yes I have. The Pro 16 is hard wired to mono and the other channel vanishes. Also, there is no built in mono sum.
Could you please give us a detailed and comprehensive description of exactly which outputs you connected to which inputs, and what type of cable you used for each connection, covering the audio interface, mixer, PA system, and IEM ?
Also, did you use a separate power supply for the mixer?
Hi David,
Many thanks for the reply. I spent a long time trying to get stereo IEMs with the mono maintained. I could not do it. In the end, I decided not to bother for several reasons:
- I didnt have that many songs panned
- The mono versions sounded as good anyway.
- Because The Bose L1 Pro systems have a 180 deg horizontal spread of sound, stereo just isn’t necessary as are IEMs or other foldback in my situation as a solo performer. I was stunned the first time I used the line array system by the quality and wide spread of the sound having come from an HK Lucas Nano 608i 2.1 system that had let me down twice in mid performance. Cheers.